Partition Walls and Internal Framing
Straight walls, delivered to the floor they go on.
Where accuracy shows
A stud two millimetres out shows in the paint.
Internal partition framing is where dimensional accuracy shows immediately. A stud that is two millimetres out telegraphs through the board, through the skim and into the paint.
Our partition studs are roll-formed to the millimetre, punched in-line for services, and delivered cut to length and grouped by wall. Your crew sets out and fixes. Nobody measures, nobody cuts, nobody improvises.
What we provide
Cut, punched and grouped by wall.
- 01Take-off from your architectural or fit-out drawings
- 02Stud and track fabrication in 75 mm and 89 mm
- 03Service holes pre-punched to the drawing
- 04Delivery cut to length and grouped by wall reference
- 05Installation where required
- 06Boarding and finishing where required
Typical applications
Where the studs go up.
Retail and hospitality fit-out
Residential internal walls
Villa and apartment refurbishment
Ceiling and bulkhead framing
Key facts
The specification.
- Profiles
- 75 mm and 89 mm
- Gauge
- 0.55 mm to 1.2 mm
- Supply
- Material only, or supplied and installed
- Minimum order
- 10 sq m
Start a fit-out
Framing a fit-out? Send us the drawings.
Send your architectural or fit-out drawings and we will take off the framing, price it, and advise on supply-only or supplied-and-installed.
info@amaf.ae · +971 55 669 7693