01
Our Factory
Coil goes in one end. Structure comes out the other.
Warehouse #30, Industrial Area 17, Sharjah.
Inside
5,000 sq ft under roof. 15,000 in the yard.
Our facility in Industrial Area 17, Sharjah covers 5,000 square feet of covered production, with a further 15,000 square feet of open yard used for porta cabin assembly.
Galvanised steel coil is received, verified against its mill certificate and loaded onto the decoilers. From there the approved detailing file drives the machine directly — cutting, punching, dimpling and forming each profile to the exact dimensions the drawing specifies.
Formed components move to the assembly bays where panels and trusses are squared, fixed, checked and marked. Finished panels move to the yard, are stacked in delivery sequence, and loaded so that the first panel off the truck is the first one your crew needs.
There is no manual measuring and no interpretation between the drawing and the product. The file is the instruction.
Production flow
Seven stations, in sequence.
02
Decoiling and machine loading
03
Roll-forming to the approved file
04
Panel and truss assembly
05
Dimensional inspection
06
Marking and sequencing
07
Loading and despatch
Scroll to advance
The machines
Four roll-forming systems.
Proformer A1 (A1XE)
Proformer Rollform Machinery Corp., Taiwan
- Single web size profile framing system
- C+C and C+U configuration
Proformer A3
Proformer Rollform Machinery Corp., Taiwan
- Three web size profile framing system
- C+C and C+U configuration
Pinnacle X1 — 18ga
Machine 1PinnacleFRAMER X1-18ga
- 75 mm and 89 mm profiles
- 0.6 – 1.2 mm material
- 9 roll-forming stations with auto-gauging
- Wall frames 500 – 900 m/hr
- Roof trusses 300 – 500 m/hr
- Floor trusses 200 – 300 m/hr
- Servo driven
Pinnacle X1 — 18ga
Machine 2PinnacleFRAMER X1-18ga
- 75 mm and 89 mm profiles
- 0.6 – 1.2 mm material
- 9 roll-forming stations with auto-gauging
- Wall frames 500 – 900 m/hr
- Roof trusses 300 – 500 m/hr
- Floor trusses 200 – 300 m/hr
- Servo driven
Every profile is punched in-line with service holes, lip notches, web notches, flange dimple connection holes and end crimps. No secondary drilling or cutting is required on site.
The facility
The numbers behind it.
- Location
- Warehouse #30, Al Saud Real Estate, Industrial Area #17, Sharjah
- Covered area
- 5,000 sq ft
- Open yard
- 15,000 sq ft
- Machines
- 4 roll-forming systems
- Capacity
- 3,000 sq m framing and 20 porta cabins per month
- Team
- 30
- Established
- 2018
Visit us
Come and see it.
Walk the line from coil to finished panel. We are in Industrial Area 17, Sharjah, and visitors are welcome during working hours.
Warehouse #30, Industrial Area #17, Sharjah · +971 55 669 7693